Virutex Portable, Hot Air Edgebander it's the only manual bander with tracking of tape on the board. It's suitable for use with most types of preglued edging, easily applying pre-glued PVC, polyester, melamine, and wood veneer of up to 2" wide (50mm).

This light weight portable edgebander has long proved to be popular for site and workshop alike.

The unit applies heat direct to preglued edging material ensuring the best possible application and bonding. A set of rubber clamps hug the board so you can get the most accurate tracking of the tape on the board. This hand held portable edgebander it's perfect for circular and shaped pieces with a minimum internal radius of 20mm. Its easy adjustment and application makes it the best portable edgebander on the market.

It's supplied with practical edge trimming system.  Set up time is less than one minute. Two step temperature switch: Step one: 300C or 570F; Step two: 525C or 1,000F. Air delivery: 400 L/min. or 16 CV. feet/min.

Cuts both sides simultaneously. Double edge trimmer. Cuts both sides simultaneously. For edges up to 40 mm. For larger edges it can be used as two independent edge trimmers. Top quality long life blades which are easy to replace once worn. As Double Scraper provides a professional finish removing the remains of glue or burrs.

Clean and high quality cut. Manual end trimmer. It allows a perfect, clean and high quality cut on all the corners of the board. No other finishing operations are needed. Equipped with twin use blades.